The SMS Transceiver V3 is a competent alarm transmitter with a broad area of use. All kinds of making och breaking sensors can be connected and the alarm transmitter will send both alarms and reset messages if needed. Supplement with an rechargeable internal batterybackup to get full function during during the battery life (24h) as well as an additional power failure alarm text.
- Broad voltage range, 9-28V AC/DC
- 6 inputs (4-28V DC), send alarms via text and phone call
- 2 relay outputs, activated via text or phone call
- Broad area of use
- Easy operation
- Individual alarm messages, (max. 140 characters)
- No need for land line – low operational cost
- Alarm could be sent to mobile phone and/or security company
- Easy configuration with accompanying PC-programme
- Status via text message
- Robust aluminum casing
SMS Tranceiver V3 Unit
230V Power supply - 24VDC
GPRS/Dial Up Data (CSD)
Signal Strength Indication
Text At Power Loss
Text At Low Battery
Battery Backup (accessory)
Remote Activated Output
Input Power Rating
Making 24V 1A
Current consumption nom
Temperature Rating (c)
-20 - +70
Dimensions LxWxH (mm)
Number of alarm texts per input
2 alarms + 2 resets
Sends Both Alarm And Reset
The SMS Transceiver V3 is developed to be used as a GSM-based alarm transmitter or for operations monitoring. The unit is simple to install and easy to use. The SMS Transceiver V3 is able to send alarm messages via SMS to mobile phones emergency centres et cetera. Equipment connected to the units relay outputs can be remotely controlled via SMS or phone call.
The unit is equipped with six alarm inputs which can be connected to both N/O and N/C sensors as well as a voltage output 4-28V DC. The inputs can generate alarms both when triggered and when returning to their normal state i.e. when voltage is applied and when the voltage disappears. The inputs have two alarm modes. Block time to prevent repeated alarms and activation delay to set the time an input needs to be triggered before sending an alarm. Each input can generate two SMS to two recipients when current is applied and when current disappears. The unit can also make a call to the SMS recipients to attract further attention.
The SMS Transceiver has two relay outputs which are operated by SMS or a free call. This function can be used to remotely control a pump, ventilation, a heater et cetera. The relays are for low current, max 1A at 24V.
All settings are easily made in the PC-programme. SMS Transceiver V3 Config Tool can be ordered free of charge. Several settings can also be done via SMS. Current configuration and status for the unit can be retrieved via SMS.
An access list of up to 238 numbers ensure that only authorised personnel may remotely control the unit. The SMS Transceiver V3 can be equipped with an internal battery back-up. With this option installed, the external power supply will be monitored. SMS alarms can be sent in event of external power failure and when the power returns.